CGDI Prog MB Car for Benz Add Fastest Key Programmer Support All Key Lost
Top 4 reasons to get CGDI Prog MB:
1.Support fastest for Benz Car key add: collection time 1’50s, password calculation time 40s, 99% get password for one time calculator, it is the fastest key programming tool to calculate the password at present.
2.Support MB all key lost: support models including 211,209,204,207,212,166,246,197,172,164 +, 216
3.CGDI Prog MB can calculate the password twice free each day.
How to activate CGDI Prog MB?
CGDI Prog for MB needs activation when you receive it. Please follow the steps as below:
1. Download for Benz Monster software from official website, there will be user manual too in the software catalogue
2. Install software on your laptop and read out serial number of your CGDI
3. Pass serial number to our customer service, when activation is done, please restart CGDI Prog for Benz and for Benz Monster software, it will be ready to use.
For MB Monster 22.214.171.124 2017/11/11 Update Info:
1. Calculate the erase password function (including the engine computer, ISM computer, EGS computer, ELV)
2. Calculate the key to enable the password function (you can directly use the disable key)
3. Erase the lock function (support CAN protocol, K-line protocol)
4 write lock data function
5. Write frame number function
6. Activate the lock function
7. Clear the TP protection function
8. Calculate the key current track code function
9. Add to determine whether the dealer lock
10. Fix problems that can cause the program to crash under certain conditions
11. Optimization part pop-up prompt box to enhance the stability of the program
12. increase some tips, the operation experience more accurate
CGDI Prog MB for Benz introduction:
Able to add keys on for Mercedes Benz and program a new key when all keys are lost.
Add new for Mercedes Benz keys: Data acquisition for 1 minute 50 seconds, pin code for 40 seconds and 99% success.
Program a new key to the following models when all keys are lost: 211, 209,204, 207, 212, 166,246,197,172,164+, 216 etc.
1). Can read EIS data via OBD, no need to distinguish the EIS/EZS model.
2). Can display the key status and directly disable the key position.
3). Can display EIS Number, can distinguish for Benz model
4). Can display EIS status.
5). Automatically identify EIS model.
6). Automatically identify CAN protocol
Generate the Key Data:
1) Can generate the key data of HC05/908/912/9S12/NEC EIS/EZS
2) Time: 26 seconds
3) Format: 11/ 41/51 (41 format is smart key data)
Infrared Key Function:
1) Can directly read key pin code via infrared on parts of 209/211/220/215 EIS.
2)Can read/write EIS via infrared.
CGDI MB Prog Programming Key Features:
1). Automatically identify the basic key information (including how many times you used SSID)
2). Can directly read pin code of BE keys via infrared, can erase BE keys.
3). NEC adapter can write the original for Benz smart key and common key.
4). Can write for Benz original key via infrared.
5). Can restore the data of key and EIS with the key password.
2. Workable for MB Car Model:
for MB A series (2004 -)
for MB B series (2005-)
for MB C Series (2001 – , including 210)
for MB E Series (2001-, including 203)
for MBenz CL series (2001-)
for MBenz GLK (2004-)
for MBenz ML series (2003 -)
for MBenz R series (2003 -)
for MBenz G series (2003 -)
for MBenz S Series (2001 -, including 220)
for MBenz SLK (2003- )
for MBenz SLS (2004 -)
for MBenz Vito (2003-)
for MBenz Sprinter (2003 -)
for MBenz Vito (2003 -)
How to Use CGDI MB Programmer Add Key for Benz?
CGDI Prog MB is able to add for Mercedes Benz car keys as well as program new keys when all keys are lost.
Step 1: Click on “Lock (EIS)
Step 2: Click on “Read EIS data”
Step 3: Click on “Computer Password”, then click on “Copy key with key”
Step 4: Click on “Other Keys” (One generation of key 705E6 key), then click on “OK”.
Step 5: Please insert the key into EIS and click OK.
Step 6: Please insert the key into the device and click on OK!
Step 7: Collecting the data, do not remove the key.
Step 8: Please insert the key into EIS and click OK.
Step 9: Please wait for 7 seconds.
Step 10: Please pull out the key from the EIS, and then click OK!
Step 11: Please insert the key into the EIS again and click OK!
Step 12: Unplug the key for 5 seconds, then insert the EIS, then click OK!
Step 34: Select chip type.
Step 35: Note: Smart key please choose 41 format, common key and BE key please choose 51 format!
Step 36: Select the location of writting key, then click on “Open”.
Step 37: CGDI MB Write key success!
Step 38: Password display area, write down the password manually.
BE key read password directly, no need to collect data!
1*CGDI MB main unit
There are no reviews yet.